The VAMO is the Housing Body Only, does not include the Li-
The Vamo V5 is sleek, powerful, reliable, full featured and very well built with the same features as the V3 but body of the V2:
The Vamo V5 Variable Voltage/Wattage MOD is sleek, powerful, reliable, full VAMO V5 box featured and very well built with the same features as the V3 but body of the V2. Voltage or Wattage is variable 3.0-
The VAMO V5 Variable Voltage/Wattage MOD is single mode which provides RMS voltage monitoring. The RMS mode is more accurate because it samples the output Voltage repeatedly while it is powering an atomizer or cartomizer. With its 5 Amp output, it has ample power to run whatever device you want.
The buttons and settings are easy to figure out. This version has stainless buttons and easy to read OLED display. VAMO V5 Variable Voltage/Wattage MOD is completely compatible with the eGo series atomizers/cartomizers/clearomizers.
1. Variable voltage -
2. Variable wattage -
3. 0.75" OLED display screen showing menu, function, selection and shows you remaining battery life and how many "puffs" you have taken since last charging process.
4. Maximum current output: 5A
5. Check atomizer/clearomizer/cartomizer resistance(1.5-
6. Check voltage, wattage and current
7.510/eGo threading connector, compatible with 510 and eGo threaded atomizers/clearomizers/cartomizers with resistance (1.5-
8. Can be powered by 1 x 18350 battery / 2 x 18350 / 1 x 18650 battery
10. Reverse battery protection, over current protection
11. Thermal Monitoring shut the device off if it detects a high temperature condition.
12. Time limit protection function
13. Low voltage, low load (resistance) and short circuit warning
14. Bottom vent hole
Name : VAMO V5 Variable Voltage/Wattage MOD
Body Material: Stainless Steel
Diameter: 22 mm
Length: 135 mm
Net Weight: 123 gram (does not include the Li-
Shipping Weight: 198 gram (with package, does not include the Li-
Accepts Battery: 1 x 18350 / 2 x 18350 / 1 x 18650 Li-
What atomizers/cartomizers can be used in the VAMO V5 Variable Voltage/Wattage MOD?
The VAMO V5 Variable Voltage/Wattage MOD comes with 510/eGo threading connector, compatible with 510 and eGo threaded atomizers/clearomizers/cartomizers with resistance (1.5-
How to use VAMO V5 Variable Voltage/Wattage MOD?
Press and hold down the” +” and” -
VAMO V5 Control Panel
Note: The VAMO V5 can’t use an ego battery charger to charge. You should take out the 18350/18650 battery to charge appropriate cell with appropriate charger. When the indicator light is red, the Cell is charging. When the light turns green, charging is complete.
Attention: It can not be charged from the battery screw end like eGo battery.