How to use Aspire Aerotank Mega clearomizer
Summary: Introduction of Aerotank Mega BDC Adjustable Airflow Pyrex Glass Tank Clearomizer; Accessories of Aerotank Mega clearomizer ; The exploded view of Aerotank Mega; How to assembly Aerotank Mega clearomizer ; How to refill e-
Instructions: The Aerotank Mega is the next generation of tank systems. Made of stainless steel and Pyrex glass, the Aerotank Mega also uses the “BDC” (Bottom Dual Coil) atomizer technology. The Aerotank Mega has an exclusive adjustable airflow design that is revolutionarily.
With a simple turn of the lower ring, you have options to adjust airflow to meet the user’s different requirements for vaping. With the option of sliding the bottom ring, the user can adjust to different size air-
1 x Aerotank Mega Metal Tip
1 x Aerotank Mega Tank Top Cap
1 x Pyrex Glass Tube
1 x Stainless Steel Tube (Optional use)
1 x Aerotank Mega Tank Base
2 x BDC Bottom Dual Coil Heads
1 x Airflow Adjustment Base
1 X eGo Threaded Cone (Optional use)
1: Screw the Airflow Adjustment Base off the Aerotank Mega Tank.
(Keep other parts of the Aerotank Mega Tank tight!) (DO NOT over tighten!)
2: Screw the Coil Head into the Airflow Adjustment Base.
(Make sure the Coil Head is snuggly down hand tight).
3: Snugly screw the Aerotank Mega Tank into the Airflow Adjustment Base.
4: Insert the Metal Tip into the Aerotank Mega Tank.
1: Check to make sure all parts of the Aerotank Mega Tank are screwed tightly to each other.
2: Screw the Airflow Adjustment Base off the tank.
(Tip: The Coil Head may have loosed with the Bottom Base, if so, Check to re-
3: Fill E-
(DO NOT over fill or get e-
4: Screw the Airflow Adjustment Base back onto the Aerotank Mega Tank again.
The Aerotank Mega’s unique airflow valve features 1 different size airflow slide to control the airflow to the amount you prefer. Rotate the Airflow Adjustment Ring along the airflow slide, you can now adjust how hard or soft the draw is, how warm or cold the vapour is, and how much vapour is produced.
When necessary, clean the components (except the BDC coil head) by washing with clean water, and air-
1. The Glass tank should not be impacted, dropped, or mishandled… otherwise the glass tube may be broken and injury may occur.
2. When disassembling, please remove the Airflow Adjustment Base first, and then screw off the Aerotank Mega Tank.
3.Do not fill the Aerotank Mega over 3.8ml; when the e-
4. If the Airflow Adjustment Base is hard to be screwed off, please screw the Aerotank Mega Tank with the glass tube tightly and then the bottom base should be easier to screw off.
Manufacturing Electronic Cigarettes since 2007